top of page

​​

        ​Installation Instructions

       for Alarm Systems Application Adapter – miniTO

​​​​

  1. Disconnect the alarm system power. Make sure to unplug the backup battery

  2. Thread the cable into the box of the alarm system.

  3. Avoid fixing the adapter to the wall until reaching the final installation step after testing WiFi level through the app and improving location for maximum WiFi signal.

  4. Connect the wires according to the colors.

  5. Reconnect the alarm system voltage.

  6. Download and install the mobile phone app.

  7. Make users sign up for the app.

  8. Check the WiFi input level in the app, and make sure
    That there is good absorption in the green field.

  9. Avoiding installing the miniTO in a metallic environment.

  10. Finish installation.​​

miniTO_alarm_system_Wiring.png

​​

        ​Installation Instructions

       for Alarm Systems Application Adapter – miniTO

​​​​

  1. Disconnect the alarm system power. Make sure to unplug the backup battery

  2. Thread the cable into the box of the alarm system.

  3. Avoid fixing the adapter to the wall until reaching the final installation step after testing WiFi level through the app and improving location for maximum WiFi signal.

  4. Connect the wires according to the colors.

  5. Reconnect the alarm system voltage.

  6. Download and install the mobile phone app.

  7. Make users sign up for the app.

  8. Check the WiFi input level in the app, and make sure
    That there is good absorption in the green field.

  9. Avoiding installing the miniTO in a metallic environment.

  10. Finish installation.​​

wifi signal Gold.png

  • Installation notes for iPhone:

    • When an error message appears while trying to connect to the miniTO WiFi network
      Go to Settings > General > Reset > Reset  Settings.
      Enter the devices passcode and confirm the reset.
      Let the /iPad restart, you'll see a spinning cursor on the device as it finishes the reset before the device boots back on.
      After the wifi reset process completed You can easily connect to the miniTO Wifi network and continue the registration process.​

  • Installation notes for Android:

    • If you are having trouble connecting to miniTO's WiFi - Remove or forget miniTO's WiFi network from your device, and then try again.

      • Important: Settings may vary from device to device. For more details, contact your device manufacturer.
        To delete a saved Wifi network from your phone or tablet -
        Go to the Wifi section on your settings menu.
        Find the network you want to get rid of.
        Long press it, then chose "Forget."​

bottom of page